Quantcast
Channel: Squeezebox : Community : Forums - Logitech Media Server
Viewing all 5306 articles
Browse latest View live
↧

Mp3 stream bitrate limiting

February 14, 2017, 7:07 pm
$
0
0
I'm trying to have lms (squeezeserver on a Raspi) take an mp3 webstream and output to a lower bandwidth stream. For some reason, the same stream sometimes correctly gets routed via Lame.and other times doesn't. The error in the logs makes it seem that it can't find a matching converter that supports url streaming (R) .

Any ideas where to go with this?

Also, is there a way to do 32 bit output, like lame supports?

Thanks
↧
Search

LMS keeps stopping

February 17, 2017, 3:25 am
$
0
0
For the last week or so my LMS 7.9 keeps randomly stopping. I have updated top the latest release to no avail. Seems to happen whilst listening to either internet radio or Random Play from my music server. The errors seem to be to do with accessing some remote server (bitsmitter.com). Any suggestions what I can do to stop it as the whole system is becoming unusable. Server log attached.

[17-02-15 09:36:56.5528] main::init (384) Starting Logitech Media Server (v7.9.0, 1477086729, Wed Nov 16 04:05:47 CUT 2016) perl 5.014001 - MSWin32-x86-multi-thread
[17-02-15 09:37:21.7298] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8004/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:21.7627] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8004/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:21.7704] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8004/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:21.8135] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8004/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:21.8187] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8004/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:21.8225] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8004/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:21.8287] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8004/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:21.8334] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8004/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:22.8108] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8002/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:22.8117] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8002/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:22.8120] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8002/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:23.0139] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8002/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:23.0149] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8002/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:23.0159] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8002/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:23.0163] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8002/: Connect timed out: Bad file descriptor.
[17-02-15 09:37:23.0170] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: Can't connect to remote server to retrieve playlist for, http://bitsmitter.com:8002/: Connect timed out: Bad file descriptor.
[17-02-15 09:38:23.8801] main::init (384) Starting Logitech Media Server (v7.9.0, 1477086729, Wed Nov 16 04:05:47 CUT 2016) perl 5.014001 - MSWin32-x86-multi-thread
Attached Files
↧
↧

Unresponsive LMS

February 17, 2017, 10:26 pm
$
0
0
Started a few days ago (it not the first time it happens, but this time it is super irritating so I've decided to try to investigate the problem properly) my LMS system become totally unresponsive. Playback of a track (local, remote does not matter) will most often not start or take 30s to start and the service log file is full of sequences like that

[17-02-17 22:09:35.1524] Slim::Networking::Discovery::Players::_players_err or (146) Unable to get players: Timed out waiting for data
[17-02-17 22:09:35.1530] Slim::Networking::Discovery::Players::_players_err or (146) Unable to get players: Timed out waiting for data
[17-02-17 22:09:36.0829] Slim::Networking::Discovery::Players::_players_err or (146) Unable to get players: Timed out waiting for data
[17-02-17 22:09:36.0837] Slim::Networking::Discovery::Players::_players_err or (146) Unable to get players: Timed out waiting for data
[17-02-17 22:09:36.0842] Slim::Networking::Discovery::Players::_players_err or (146) Unable to get players: Timed out waiting for data
[17-02-17 22:09:36.0850] Slim::Networking::Discovery::Players::_players_err or (146) Unable to get players: Timed out waiting for data
[17-02-17 22:09:36.0855] Slim::Networking::Discovery::Players::_players_err or (146) Unable to get players: Timed out waiting for data
[17-02-17 22:09:36.0860] Slim::Networking::Discovery::Players::_players_err or (146) Unable to get players: Timed out waiting for data
[17-02-17 22:09:36.0865] Slim::Networking::Discovery::Players::_players_err or (146) Unable to get players: Timed out waiting for data

I know it sounds like a network issue, but my network works perfectly fine. I have many devices, I can stream netflix, download at fast speed, copy large files from various computer all good, not sudden pause of connection. This is LMS 7.7.5 on Win7. I did not change anything in my network config and again, it works absolutely fine,whether I copy files, stream HD video or do video conf, wired or wireless.

Any idea?

Thanks
↧

Getting app to work in LMS

February 18, 2017, 5:48 am
$
0
0
Guys, many thanks for the add.

Very new to this stuff. Last week I set up a RPI running Ipcore/LMS. Managed to get things set up fine and had the Tidal app running and playing fine in LMS. I then got too cocky and started messing with settings in ipcore trying to set up another DAC.

Messed everything up completely.

So today I flashed a new card, all seems stable. My problem now though is I can't get the Tidal app to show in my "home page" under my apps in LMS.

When I click on apps and tidal sure enough I've installed it and signed on but it just won't appear in my apps on the home screen. I'm missing a trick here obviously. Can't for the life of me remember how I did it last week.

Many thanks for any pointers lads. Appreciated.
↧

No songs or streams playing (but all connected ok)

February 18, 2017, 5:31 pm
$
0
0
hi All,

Frustrating new dillemma:

3 x players (radio, classic, Trans2)
7.9.0 installed on linux mint

Was all working fine a week ago.

Symptoms:

When choosing a song or stream (on any player, MSB.com or LMS), the track appears to be playing on the server (via gui) but there is no sound or time count, (or other clues of music playing).

yes, I have checked amp, speakers, etc etc!

Log is also weird,

1675 error while retrieving mysqueezebox.com/api/myapps/v1 (but im not trying to retrieve it..) - any time i try to play a new track
443 request not dispatchable - occasionally

Many thanks in advance as always

w

Sent from my SM-T800 using Tapatalk
↧
↧

LMS Changed Language Over NIght

February 19, 2017, 9:01 am
$
0
0
> Thanks for the reply and I verified that port 9000 is not being
> forwarded,

Check again. I can access that port on the IP address from which you are posting.



↧

Lots of errors on server log

February 20, 2017, 2:41 pm
$
0
0
Hi,
Very sorry for cross-posting, I already posted this http://forums.slimdevices.com/showthread.php?107004-Dynamic-Playlists-plugin-not-showing-my-own-playlists-on-RPi.
I'm trying to have a fully functional LMS on RPi and I have some problems: my own dynamic playlists are not working, I'm trying to use MusicIP on raspberry with some problems too and it's sometimes very slow. After some reflection, I think have too many strange errors in the server log, so maybe it's the source of my problems, and not the plugins.
I attach the server.log.

Thanks a lot
Antonio
Attached Files
↧

Genre-Classical-Various Artists mixed up ?

February 21, 2017, 12:21 am
$
0
0
That's a preference you can set in Settings/My Music.

--

Michael
↧
Search

[Howto] play Ogg Opus files

February 21, 2017, 2:51 pm
$
0
0
Since I recently came across some music in the Ogg Opus format, I looked into playing it with LMS.
The main issue is that the library LMS uses to read audio metadata (AudioScan) doesn't support Opus. I did, however, find a forked version which does.
As this one hasn't been updated in a while, I decided to merge the Opus support into the current AudioScan.

Attached you will find a patch for AudioScan enabling Opus support (credit goes to the original author linked above), plus some support files for LMS.

Instructions
Install the Opus libraries and sox with the Opus codec enabled. Most likely, your distribution will have it packaged already (e.g. libopus, libopus-dev, opus-tools, sox in Debian)
Note: if your sox version doesn't support Opus (check with sox -h), you can compile it yourself or use opusdec instead. However, you will lose the ability to seek in a track when using opusdec.

Download the attached zip and build the module:
Code:
mkdir build; cd build
wget https://raw.githubusercontent.com/Logitech/slimserver-vendor/public/7.9/CPAN/buildme.sh
wget http://search.cpan.org/CPAN/authors/id/A/AG/AGRUNDMA/Audio-Scan-0.96.tar.gz
wget https://github.com/Logitech/slimserver-vendor/raw/public/7.9/CPAN/Sub-Uplevel-0.22.tar.gz
wget https://github.com/Logitech/slimserver-vendor/raw/public/7.9/CPAN/Test-Warn-0.23.tar.gz
wget https://github.com/Logitech/slimserver-vendor/raw/public/7.9/CPAN/Tree-DAG_Node-1.06.tar.gz

unzip lmsopus-alpha.zip

tar xzf Audio-Scan-0.96.tar.gz
cd Audio-Scan-0.96
patch -p1 < ../Audio-Scan-0.96.opus.patch
cd ..
mv Audio-Scan-0.96.tar.gz Audio-Scan-0.96.orig.tar.gz
tar czf Audio-Scan-0.96.tar.gz Audio-Scan-0.96
chmod +x buildme.sh
./buildme.sh Audio::Scan
If the build was successful, you'll find the perl modules in
Code:
./build/arch/<perl version>/<architecture>
e.g. for perl 5.24 on Linux 64bit:
Code:
build/arch/5.24/x86_64-linux-thread-multi
copy the content of the build/arch directory to your LMS installation's CPAN/arch folder
e.g. if your LMS is in opt/logitechmediaserver-7.8-0-noCPAN, the full final path will be
Code:
/opt/logitechmediaserver-7.8-0-noCPAN/CPAN/arch/5.24/x86_64-linux-thread-multi/auto/Audio
...
In your LMS installation, edit Slim/Formats.pm and add the format:
Code:
        'ogf' => 'Slim::Formats::OggFLAC',
        'ops' => 'Slim::Formats::OggOpus',  # add this line
and finally copy OggOpus.pm to your LMS installation's Slim/Formats folder

This takes care of the metadata part. To actually be able to play it, add this line to your custom-types.conf:
Code:
ops        opus        audio/ogg        audio
and modify your custom-convert.conf.

For sox with opus:

Code:
ops mp3 * *
        # IFB:{BITRATE=--abr %B}D:{RESAMPLE=--resample %D}
        [sox] -q -t opus $FILE$ -t wav - | [lame] --silent -q $QUALITY$ $RESAMPLE$ $BITRATE$ - -

ops ops * *
        -

ops aif * *
        [sox] -q -t opus $FILE$ -t raw -r 44100 -c 2 -2 -s $-x$ -

ops pcm * *
        [sox] -q -t opus $FILE$ -t raw -r 44100 -c 2 -2 -s -

ops flc * *
        # IFRD:{RESAMPLE=-r %d}T:{START=trim %s}
        [sox] -t opus $FILE$ -t flac -C 0 $RESAMPLE$ - $START$

For opusdec:
Code:
ops mp3 * *
        [opusdec] --quiet $FILE$ --force-wav - | [lame] --silent -q $QUALITY$ $RESAMPLE$ $BITRATE$ - -

ops ops * *
        -

ops pcm * *
        [opusdec] --quiet --rate 44100 $FILE$ -

ops flc * *
        [opusdec] --quiet --force-wav $FILE$ - | [sox] -q -t wav - -t flac -C 0 $RESAMPLE$ -
Attached Files
↧
↧

Transcode / Resample Custom-convert.conf

February 21, 2017, 4:34 pm
$
0
0
Kinda new with LMS, can someone explain to me the following:

This command works on the command line: sox -V6 thriller.flac -t wav -r 44.1k -b 16 thriller_16_441.wav and convert a 88.2kHz, 24 bit file to wav format 16bit, 44.1kHz.

I try custom-convert.conf file like:
flc pcm * *
# FT:{START=--skip=%t}U:{END=--until=%v}D:{RESAMPLE=-r %d}
[sox] $FILE$ -t raw -r 44.1k -b 16 -c 2 -s -L -

and it works well with flac upto 44.1/16 resulting in a PCM 1411 kbps file but when I get to 88.1 or 96kHz the command returns a PCM stream of 4233 kbps and it of course sounds like the chipmunks.

Essentially it looks like resampling is not working with the hires flac files.

Any input would be appreciated.
↧

Spotify error

February 22, 2017, 5:04 am
$
0
0
> Yes another account of mine.

Ok, good to know. I first thought there were MAC address conflicts again.

> I am wondering whether other people have fallen for this trap.
> Building a pCp player on their own network and then moving it elsewhere
> to find it wont pick up Spotify.

Good point. Will try to keep this in mind.

> I hadn't realised that the pCp in question had registered itself at
> mySB.
> An easy fix when you realise but as I said above the log doesn't tell
> you.
> I tripped over the reason only because I had JiveLite and thought to
> compare the menu on that to the web gui.

The web UI wouldn't show that message?

> On the 7 day thing. What is happening ? Is this telling LMS to refresh
> the player list once a week or what ? I said it was unusual as I am used
> to dealing with DNS TTL which are much shorter.

It depends: when dealing with an account which doesn't have any genuine
SB, then the polling interval is longer. Login should still happen. The
reason being that the polling initially was to sync states between LMS
and mysb. But if you don't own a player which can connect to mysb.com
directly, then this isn't really important.

--

Michael
↧

Windows 10 / Chrome strangeness

February 22, 2017, 6:44 am
$
0
0
I had a search but couldn't see any other reports of this.

On my Windows 10 PC, the left pane of LMS does not display a scroll bar, e.g. when an artist has a lot of albums to display. Also, the Save, Play and Add to Current Playlist 'buttons' are inactive - the More one works though. Not sure when this started happening, but it used to be OK.

All is fine if I use Microsoft Edge. Everything is also fine if I use Chrome on Windows 7.

Is it just me?

Colin

Logitech Media Server Version: 7.9.0 - 0.143.20160903git1472633108 @ Wed Sep 21 17:32:59 EDT 2016
Hostname: ******
Server IP Address: ***.***.***.***
Server HTTP Port Number: 9000
Operating system: Red Hat - EN - utf8
Platform Architecture: x86_64-linux
Perl Version: 5.22.2 - x86_64-linux-thread-multi
Audio::Scan: 0.95
Database Version: DBD::SQLite 1.34_01 (sqlite 3.7.7.1)
Total Players Recognized: 5
↧

Cool story bro' ...

February 22, 2017, 10:45 pm
$
0
0
Sorry, this post is just one of those random ones, but things have moved on so much.

I have to take my LMS hosting laptop to work as I need the bandwidth to sync/backup my music collection to Amazon Cloud Drive (moving from OneDrive) but I still needed a local server for at least on-line radio in the house.

I started fretting about leaving a desktop PC on and installing LMS and all that. Then "lightbulb!" ... I have a Raspberry Pi 3 doing CCTV recording... and voila, there's a Debian ARM package, wget ..., dpkg -i ..., web access, done.

That is a lot simpler and quicker than it was few years ago, and my RPi3 is now doing even more than it used to for very little cost.
↧
↧

iTunes tags - "Work" "Movement" "Name" and LMS

February 23, 2017, 10:19 am
↧

LMS 7.9 doesn't start anymore

February 24, 2017, 12:50 pm
$
0
0
Hi all,

I don't know why but with the last LMS version (7.9.0 r1487582706) the server doesn't start anymore. Nor automatically (like it used to) nor manually (even with admin rights).

It worked perfectly fine just a couple of days ago.
I'm on Win 7 64b.

Any suggestion ?
I can't listen any music, it's horrible !! :)

Regards,
Pierre

PS : if it can help, here is the diagnostic tab in the LMS control panel :

LMS : stopped
port 3483(slimproto) : failure
port 9000 (http) : failure
port 9090 (cli) : failure

alerts : possible software conflict detected
↧
Search

Cannot connect to LMS on port 9000

February 25, 2017, 5:54 am
$
0
0
Hi,
I've run into some trouble here and can't figure out how to solve it.
Brief overview of events:
-I had LMS version v7.9.0, 0.126.20160422git1461319207 running on a Fedora 23 box.
-The media files were nfs mounted from another machine serving as a NAS.
-Power supply of NAS crashed.
-Initially LMS kept running and as I was only running some radio stations on several raspberries running Max2play, I didn't realize the trouble ahead.
-At one point in time (I don't know what really happened) I couldn't connect anymore to the web interface.
-It was then that I realized the nfs mounts were gone. Since the power supply replacement was going to take some time, I decided to modify the server.prefs and let the media directory point to another (empty) directory on the on the F23 box, thinking that would be enough for the server to start and let me listen to some radio stations.
-Restarted the squeezebox.service but could not connect to the web interface. (firewall disabled)

lsof -Pnl +M -i4 gives the following:

Code:
squeezebo 12353      986    7u  IPv4 41454519      0t0  UDP *:3483
squeezebo 12353      986    8u  IPv4 41454520      0t0  TCP *:3483 (LISTEN)
squeezebo 12353      986  22u  IPv4 41455554      0t0  TCP *:9090 (LISTEN)
squeezebo 12353      986  24u  IPv4 41455555      0t0  UDP *:41524
squeezebo 12353      986  27u  IPv4 41455571      0t0  UDP 192.168.0.178:1900
squeezebo 12353      986  28u  IPv4 41455572      0t0  UDP 192.168.0.251:1900
squeezebo 12353      986  29u  IPv4 41455573      0t0  UDP *:1900
squeezebo 12353      986  30u  IPv4 41455574      0t0  TCP *:41101 (LISTEN)
squeeze2u 12390      986    3u  IPv4 41454522      0t0  TCP *:49152 (LISTEN)
squeeze2u 12390      986    4u  IPv4 41454523      0t0  UDP 127.0.0.1:56617
squeeze2u 12390      986    5u  IPv4 41454524      0t0  UDP *:56441
squeeze2u 12390      986    6u  IPv4 41454525      0t0  UDP *:1900
squeeze2u 12390      986    8u  IPv4 41455768      0t0  UDP *:57295
squeeze2u 12390      986  10u  IPv4 41455981      0t0  UDP *:58766
squeeze2u 12390      986  14u  IPv4 41456061      0t0  UDP *:48999
nmap -n gives:
Code:
Host is up (0.00039s latency).
Not shown: 992 closed ports
PORT      STATE SERVICE
22/tcp    open  ssh
80/tcp    open  http
111/tcp  open  rpcbind
443/tcp  open  https
3306/tcp  open  mysql
5901/tcp  open  vnc-1
9090/tcp  open  zeus-admin
49152/tcp open  unknown
As one can see, there is no listener op port 9000 (which is definitely open since the firewall is disabled).
What is there on port 1900? Note that this is a machine with two network interfaces which are bonded.

I then tried to turn on debug logging but only found some outdated doc on how to do this. Reading through the forum I found out that now there is a --debug argument which needs to be followed by a category, but these categories are nowhere to be found if you don't have a running LMS...

I modified the squeezboxserver service file to the following:
Code:

SQUEEZEBOX_USER="squeezeboxserver"
SQUEEZEBOX_HOME="/usr/libexec"
SQUEEZEBOX_CFG_DIR="/var/lib/squeezeboxserver/prefs"
SQUEEZEBOX_LOG_DIR="/var/log/squeezeboxserver"
SQUEEZEBOX_CACHE_DIR="/var/lib/squeezeboxserver/cache"
SQUEEZEBOX_CHARSET="utf8"
SQUEEZEBOX_PID_FILE="/var/run/squeezeboxserver/squeezeboxserver.pid"
SQUEEZEBOX_OPTIONS="--localfile  --logfile=syslog --logging=all --debug server.plugins=DEBUG"
but that didn't do much.
Running systemctl stop squeezeboxserver.service takes a very long time, and I usually end up killing the squeezeboxserver processes instead...

This is the output of systemctl status squeezeboxserver.service:
Code:
● squeezeboxserver.service - SqueezeboxServer Daemon
  Loaded: loaded (/usr/lib/systemd/system/squeezeboxserver.service; enabled; vendor preset: disabled)
  Active: active (running) since za 2017-02-25 13:53:04 CET; 45min ago
 Main PID: 12353 (squeezeboxserve)
  CGroup: /system.slice/squeezeboxserver.service
          ├─12353 /usr/bin/perl /usr/libexec/squeezeboxserver --pidfile=/var/run/squeezeboxserver/squeezeboxserver.pid --cachedir=/var/lib/squeezeboxserver/cache --prefsdir=/var/lib/squeezeboxserver/prefs --logdir=/var/log/squeezeboxserver --charset=utf8 --localfile  --logfile=syslog --logging=all --debug server.plugins=DEBUG
          └─12390 /var/lib/squeezeboxserver/cache/InstalledPlugins/Plugins/UPnPBridge/Bin/squeeze2upnp-x86-64 -Z -I -x /var/lib/squeezeboxserver/prefs/upnpbridge.xml

feb 25 13:53:04 frodo systemd[1]: Starting SqueezeboxServer Daemon...
feb 25 13:53:05 frodo squeezeboxserver[12353]: [17-02-25 13:53:05.3271] main::init (384) Starting Logitech Media Server (v7.9.0, 0.126.20160422git1461319207, Fri Apr 22 18:01:34 BST 2016) perl 5.022002 - x86_64-linux-thread-multi
feb 25 13:53:05 frodo squeezeboxserver[12353]: [13:53:05.533891] main:1571 Starting squeeze2upnp version: v0.2.10.0 (Nov 23 2016 @ 22:53:30)
feb 25 13:53:05 frodo squeezeboxserver[12353]: [13:53:05.586263] uPNPInitialize:1145 uPNP init success - 192.168.0.178:49152
feb 25 13:53:20 frodo squeezeboxserver[12353]: [13:53:20.024205] AddMRDevice:1277 [0x6a7740]: adding renderer (Denon AVR-X2200W_VDP)
feb 25 13:53:20 frodo squeezeboxserver[12353]: [13:53:20.047583] sq_run_device:1208 Buffer path /tmp
feb 25 13:53:50 frodo squeezeboxserver[12353]: [13:53:50.005511] AddMRDevice:1277 [0x6a9520]: adding renderer (VDP-Kodi)
feb 25 13:53:50 frodo squeezeboxserver[12353]: [13:53:50.018064] sq_run_device:1208 Buffer path /tmp
feb 25 13:54:20 frodo squeezeboxserver[12353]: [13:54:20.053407] AddMRDevice:1277 [0x6ab300]: adding renderer (Denon AVR-X2200W_GLV)
feb 25 13:54:20 frodo squeezeboxserver[12353]: [13:54:20.066351] sq_run_device:1208 Buffer path /tmp
Any pointers on how to proceed are welcome...
Thanks.
↧

Switching between HD ans SD Tracks - No audio

February 25, 2017, 9:03 am
$
0
0
Hello everybody.

I'm running Daphile with lms 7.9 and a Marantz DAC/Amplifier PM7005. The problem I'm experiencing seems a bit strange to me...The test case is the following:
I make a playlist with two songs. Song A is an HD song (96/24), song B is a SD song (44.1/16).
Now, if I play song A first, Song B will be played but no audio comes out from the amplifier. If I play Song B first, Song A will be played and the audio comes out of the amplifier as it should be.
In the first case (no audio from the amplifier) I have to manually switch off/on the player from the lms interface and the audio starts to come out.

Can anyone give me a hint or a suggestion to solve the problem?

Many Thanks,
Giuseppe
↧
↧

How to get the scan to put all albums under one instance of an artist

February 25, 2017, 4:02 pm
$
0
0
I keep getting two entries for Bartók, Béla. They are spelled identically, with no extra spaces. About half of my albums tagged with Bartók, Béla are in one entry, the rest are in the other. Clearing the database and doing a full rescan does not help. My server is on OpenSUSE Leap 42.1.
Name: bartok.png Views: 90 Size: 30.5 KB
Attached Images
 
↧

Why does Picture Gallery keep installing itself

February 27, 2017, 11:48 pm
$
0
0
> Plugin reports V1.2.2 in Settings\Plugins page.

That's the one from the 3rd party section, I assume.

> I've removed mysqueezebox.com

How so? --nomysqueezebox?

> and I have "Use Logitech Media Server to
> re-size artwork" Grayed out in Settings\Advanced\Performance. I noticed

That's because you've disabled mysb.com. That's fine.

But what about the media folders in the basic settings? Is anything
activated for pictures and/or videos?

> Have this in my log (which indicates my PiCore Server is using epoch
> time for some reason).

That would probably be worth mentioning in the pCP discussion.

> [70-01-01 02:31:36.6914] Slim::Web::Graphics::__ANON__ (403) Artwork
> resize for /home/tc/www/images/donate_100x100_o.gif failed

I think my recent builds of Image::Scale came without support for GIF files.

That said, none of this should have any impact on the plugin installer.
Except probably for the time stamp? Hmm... Can you try to set the time
correctly, then restart LMS?

--

Michael
↧

LMS 7.9.0 Stopping After Alarm Triggers and other issues

February 28, 2017, 1:41 am
$
0
0
Hi

I've had this issue before where an alarm being triggered shuts down the LMS server. This was found to be caused by a number of 3rd party plugins that were enabled from an earlier install.

But this issue has returned in 7.9.0. Trouble is I can't actually get to see what plugins are enabled as the 'Advanced Settings' option from the control panel doesn't work either now. I just get a blank page in Edge and IE11 from the link shown in the address bar...

http://127.0.0.1:9000/settings/index.html

Nor can I access that link from another machine on the same network using the physical servers static IP, so...

http://192.168.1.33:9000/settings/index.html

In addition, when 7.9.0 installed it once again got confused about the settings it should have for those folders and files it should index Vs what was installed in the Web UI. BTW, at point of install I could see the Advanced Settings. So the Control Panel just had Z:\music but the web UI had Z:\Music and Z:\Pictures and the other one I can't remember with all three file types selected for each folder. So when I asked it to re-index it started capturing all sorts of stuff I don't want LMS to be handling. Why is there this apparent disconnect between the settings in the Control Panel and those in the Web UI?

Log files attached and zipped.

Many thanks.
Attached Files
↧
Viewing all 5306 articles
Browse latest View live
Search